BERNICE ADDO-MENSAH
ELORM ESAA ACOLATSE
EDNA YIADOM
ERIC AFOAKWAH
DOMINIC AMPAH
CHARLES EGBETORWOKPOR
DORIS ODURO-AMPADU
ELLEN ARTHUR-SARFO
DANIEL LARBI
DORA AKOTO
BERNICE OWUSU AYEH
DORIS ADUBEA BRAKO
ELIZABETH SONIA TETTEH
DEBORAH ADJEI
DINA NYARKO
BELINDA OWUSUWAA FRIMPONG
DORCAS O. BADOO
CHARLES KOFI BOSUMPRAH
BENJAMIN KOW AFEDZIE
DESMOND EDU-GYAN
ERNEST A. TUTU
CYNTHIA BENEFO
ELIZABETH AMEGAH-WOVOE
ESTHER ANSAH-DORTEY
ESTHER ASANTE GYIMAH
ESTHER OBRI-YEBOAH
ETORNAM HAWA FIATOR
EUNICE OTENG DAPAAH
EVELYN BOADIWAA BOSOMTWI
AGYEMAN-BONSU NAA DODUAH
ANGELA A. ASHITEY
EVELYN A. RICHARDSON-KUMI
AKUA AFRIYIE APPAH
DOLORES HERVIE MENSAH (PhD)
EMELIA AFRIYIE OHENE (PhD)
ACKAH OWUSU (PhD)
Mrs. Vida Doku
AUGUSTINA SIDZA
BEATRICE B. YEBOAH
EMELIA SARPONG (PhD)
IRENE LAWRENCIA OPARE DARKO
EVELYN EKUA BENTIL (PHD)
NANA YAA AMANKWAH
Samuel Lipsey Appiah-Kwapong
RITA P. SARKODIE BAFFOE
BEATRICE MENSAH-ATTA
ADU-ADJEI MENSAH
FAUSTINA MANGOR NARH
BELINDA DODOO
Abigail Addo Dankwa
FAUSTINA NANA YAA BOATEMAA
Adelaide Naa Arduah Tetteh
Rev. Bright Aforla
Leticia Osae Adum
Mrs. Edith Mensah
QUALIFICATION
MSc Applied StatisticsAREA OF SPECIALIZATION
Sample Survey, Statistical Modelling, Descriptive and Inferential statistics, Multivariate Analysis.
Mr. Isaac Ofori Asare
QUALIFICATION
MSc, Applied StatisticsAREA OF SPECIALIZATION
Multivariate Analysis, Statistical Computing, Complex Data Analysis Imagery Analysis SEM AI, Machine Learning, Deep Learning, Big Data Analytic, Science And Bioinformatics
Ms. Eunice Frimpong
QUALIFICATION
M.Phil. Actuarial ScienceAREA OF SPECIALIZATION
Financial Mathematics
Mr. Nelson Doe Dzivor
QUALIFICATION
MSc Applied StatisticsAREA OF SPECIALIZATION
Sampling Techniques, Econometrics
Francisca Atsupi Ahiator
John Boateng Nkansah
John is a multidisciplinary Research Scientist who has used several research techniques that combine a broad span of disciplines including Water and Sanitation Engineering, Environmental Microbiology, Composting, Climate Change and variability etc.
Precisely, his research focuses on the application of biochar in sequestrating carbon dioxide and other greenhouse gases as a means of mitigating climate change. His professional interest is in data science, mathematical and statistical models for understanding the behaviour of complex engineering systems. Working as a lecturer has been a good experience and has driven his natured ambitions into play. He has also received several short trainings which he has earned certificates from them. These trainings have additionally opened his horizon to different areas of expertise.
Jonathan Sasah
Mr. Michael Asamani Pobbi
QUALIFICATION
M. Phil. Applied MathematicsAREA OF SPECIALIZATION
Stochastic Modelling and Multivariate Data Analysis
Mr. Samuel K.-B. Dzidzornu
QUALIFICATION
M.Phil. Actuarial ScienceAREA OF SPECIALIZATION
Computational Mathematics/Statistics (Dynamical Systems), Machine/Deep Learning (Algorithmic Control), Actuarial/Financial Engineering (Stochastic Abstractions)
Quaye Archibald Nii Afotey
David Amoah
Rockson Mintah
Before joining the Faculty of Business, Rockson taught Financial Accounting and Business Management at Kadjebi-Asato SHS for nine years and rose through the ranks to the position of Assistant Director II. Beyond academia, Rockson has vast industry and corporate experience in audit and consultancy with private enterprises.
He teaches HND and undergraduate courses in Accounting, Finance and related disciplines. His research interests are in Taxation, Auditing, Behavioural Finance, Accounting & Business Education. Mr. Mintah has good working knowledge in using Structural Equation Modeling techniques and Bibliometric analysis; and its application to Accounting and Business Research. Mr. Mintah has co-authored publications with prominent scholars, including Prof. Godfred Mathew Yaw Owusu and Dr. Rita Amoah Bekoe. Rockson is currently a PhD candidate at the University of Ghana Business School, Department of Accounting.
Anita Bans-Akutey
Nana Benyi Ansah (PhD)
Nana Benyi Ansah’s areas of expertise are Building Technology, Construction Management, and associated Building and Civil Engineering courses. He has research interest in the Life Cycle Assessment of Building Construction Projects, Construction Health and Safety, Circular Economy in Construction, Green and Sustainable Construction and related practices.
Dr Ansah is a member of the Ghana Standard Authority (GSA) Technical Committee 11 on Building and Construction. He was a committee member on the Ghana Building Code (GS 1207-2018).
He has worked on several committees including, Committee for the Harmonisation and Adoption of Standards on Drinking Water and Sanitation (ARSO-THC-03) – Dar–El Salem, Tanzania; Committee for the Harmonisation and Adoption of Standards on Drinking Water and Sanitation (ARSO THC-03) – Nairobi, Kenya, and Committee for the Harmonisation of African Standards (ARSO).
Nana Benyi is also an adjunct lecturer at Pentecost University and Lakeside University College, Madina, an affiliate of Kwame Nkrumah University. Dr Ansah also serves as a peer reviewer for several conference proceedings, a recognised reviewer for reputable journals, and has published several quality research papers. These include co-authored book chapters, a sole-authored book on construction safety performance, and peer-reviewed journal papers.
Dr Oppong Peprah
He currently serves as a member of an ad-hoc committee in the university, tasked with developing executive business programmes for the business faculty.
Dr. Oppong Peprah also served as a reviewer for the Journal of Social Behavior and Community Health (formerly Social Behavior Research & Health). In his leisure time, he enjoys reading fictional military-science storylines and listening to Christian acapella songs.
Gabriel Amoah Sampson
Mr. Moses Odamtten
QUALIFICATION
MSc StatisticsAREA OF SPECIALIZATION
Statistical Computing
Kofi Opoku-Asante
He has had several professional training with the Institute of Chartered Accountants, Ghana, since becoming a member of the Institute. He is at the final level with the Chartered Institute of Management Accountants (CIMA), UK.
He holds a Chartered Diploma in Oil and Gas Accounting from the Institute of Chartered Accountants Ghana. He obtained his Doctor of Philosophy degree in Management with finance specialisation from Walden University in the USA in Management. He also has a Master of Philosophy in Management with a finance specialisation from Walden University in the USA. He holds a Master of Business Administration in Accounting from the University of Ghana, Legon and a Bachelor of Commerce degree with first-class from the University of Cape Coast.
Edwin Mends-Brew
QUALIFICATION
MSc (Mathematics) 1999, KNUST B.Sc. Mathematics (1994) KNUSTAREA OF SPECIALIZATION
Statistical Computing, Optimization Techniques
Kwame Abogye
Mr. Torkpor-Aboagye holds a BA Hons in Linguistics and Psychology from the University of Ghana, Legon, and a BA Hons in Communication Studies with a specialisation in Public Relations from the University of Media, Arts and Communication – Institute of Journalism (UniMAC-IJ). He further advanced his expertise with an MA in the same field from UniMAC-IJ. Currently, he is a final-year post-graduate M.Phil. student at the School of Communication and Media of the University of Education, Winneba, pursuing Strategic Communication with a focus on Public Relations and Advertising.
At ATU, Mr. Torkpor-Aboagye has made significant contributions, notably as the chair of the curriculum committee in the Liberal Studies and Communication Technology Department. Under his leadership, the department successfully revamped existing programs and developed new ones, achieving reaccreditation and accreditation for both Diploma and Bachelor of Technology programs. He also played a pivotal role in consulting for the construction and installation of an online television studio for the university.
Prior to his tenure at ATU, Mr. Torkpor-Aboagye amassed twenty-three years of professional experience in Integrated Marketing Communications, including Broadcast Journalism. His career is marked by a proven track record of successful campaigns for renowned brands such as the USA Rice Federation, USA Poultry, Kaneka, Ceylon Biscuits, Broll Ghana, Accra Mall, Vodafone, and Nestle Ghana and West Africa. His expertise in crafting compelling narratives has made a significant impact in both local and international markets.
Driven by a passion to inspire and uplift others, Mr. Torkpor-Aboagye is dedicated to fostering success and benefiting the community through his work and teachings. His ambition remains to impact others positively, nurturing their potential to become successful and beneficial members of society.
Patricia Kwakye
She holds an MEng degree in Refrigeration and Air Conditioning from PKNU, South Korea, and a BSc. degree in Mechanical Engineering from KNUST.
She is a certified EPC Trainer by the Institute of Energy Professionals Africa (IEPA), and an internationally certified Sustainable Energy Audit Professional (SEAP) and a Trainer on Installation and Maintenance of R290 ACs and Safe Handling of Natural Refrigerants. She is also a member of ASHRAE.
Patricia is passionate about digital applications and holds certificates in DigiCAP (Advanced Excel, KNIME, and Python) and Microsoft Power Apps. She is a facilitator at the digital capacity center.
She is currently enrolled in a PhD. program with the University of Johannesburg.
Dr. Latif Mohammed
He has done extensive research into innovative ways of teaching structural analysis to undergraduate students in a simple, easy-to-understand approach, making complex topics like moment distribution and matrix methods appear easy to students.
He also served as the program coordinator for the civil engineering department for 4 terms.
Dr. Latif has more than 10 years’ experience as a structural consultant in the design office and has received a Ph.D. in construction technologies and civil engineering from Voronezh State Technical University, Russia in 2019. His Research topic is reliability assessment of steel structures taking into account the development of plastic deformation.
Dr. John F.K Ekpe
QUALIFICATION
PhD Instructional Technology, 2016, Ohio, USA MPhil (Mathematics Education), 2002, UCC BSc. Mathematics (1995) UCCAREA OF SPECIALIZATION
Research Methods, Instructional Technology
Mr. Tonny Adegboyega
He has about fifteen (15) years of teaching (at various levels) and research experience as well as research project. Until he became the Acting Head of the department, he was the programme coordinator of the computer science department. Mr. Adegboyega is currently a member of the current Academic Board as well as a member of Academic Board sub-committee on ICT. Additionally, he is also a member of the Faculty of Applied Sciences Board.
He has core competencies in the following areas:
Computer and Information Security, Management Information Systems, Data Communication and Telecommunication Technologies, Operating Systems, Computer Hardware, Computer Organization and Architecture.
Ing. Dr. Mrs. Duncan
She champions Science education, women empowerment, as well as technical vocational education and training (TVET). She is the regional (Greater Accra) coordinator for women in technical education development (WITED). She is also a member for monitoring and evaluation committee of the WINE section of GHIE. Ing. Dr. Mrs. Sarah Fanny Hackman Duncan has been a youth, academic and marriage counsellor since 2003.
She is presently the Vice-Dean of student’s affairs, Accra Technical University.
Emmanuel A. Abbey
Mr. Wisdom Torgby
Prof. George Osei Adjei
Ing. David Dzitse-Awuku
He has served as Engineering Consultant, Resident Engineer, Construction Supervisor, and Geotechnical and Materials Engineer on several infrastructure projects such as bridges, roads, power plants, levees, buildings, drainage, and environmental engineering projects funded by the Ghana Government, multinational companies, international development partners, local organizations, and individuals. Some of the organizations he worked with as an Engineer include; Adamus Resources Ltd (Mining), Rio Tinto International-Simandou Iron Ore Project, Guinea-Conakry, Newmont Ghana Gold Ltd, Geotechnical Department of Architectural and Engineering Ltd. Dad Engineering and Construction Ltd. He is a qualified professional engineer with the Ghana Institution of Engineering. As an academic, David taught various courses as an adjunct lecturer at the Institute of Technical Supervision (I.T.S.) – Office of Head of Civil Service, Kumasi Technical University (KsTU), and Accra Institute of Technology (AIT). He joined Accra Technical University (ATU) as a part-time lecturer in 2017 and full-time in August 2021. Currently, he teaches courses such as foundation engineering, engineering geology, civil engineering materials, soil engineering at both HND and BTech levels. He also serves as the Laboratory and Workshop Coordinator of the Civil Engineering Department.
Raymond K. Baxey
Credentials:
Master of Arts in Public Relations, GIJ (UniMAC) Accredited Public Relations, IPR – Ghana Bachelor of Arts in Communication Studies (Public Relations Option), GIJ (UniMAC) Diploma in Communication Studies, GIJ (UniMAC)Areas of Research Interest:
Corporate Communication Science Communication Health Communication Risk Communication Brand Management
Dr. Richard Nkrumah
QUALIFICATION
PhD Applied statistics, UDS. Nov., 2021AREA OF SPECIALIZATION
Data systems engineering, machine learning, cyber security, artificial intelligence and medical data modeling.
Dr. Eric Adjei
Ing. Surv. Dr. Tina D. Wemega
Nii Ayi Solomon
E. Nii Ayi Solomon is an award-winning Ghanaian Tour Guide, Creative Entrepreneur, and Tourism Consultant. As part of marketing Ghana’s tourism products, he has attended several international trade exhibitions and conferences to promote Ghana’s travel products. Nii Ayi has over a decade of experience in the tourism industry and has guided tourists from all walks. In episode 12 of the VA Tourism Podcast hosted by Kojo Bentum-Williams (UNWTO Senior Expert for Communication in Africa), Nii Ayi talked about the devasting impact of the coronavirus pandemic on the tour guiding business in Ghana and why he thinks managers of the tourism sector need to do more to make Ghana a competitive destination.
E. Nii Ayi Solomon holds an MPhil in Marketing and is currently a PhD candidate at the University of Ghana Business School. He is an Assistant lecturer in the Department of Marketing. His recent focus is on how to use ethnography to examineexperiences told through blogs, photography, and social media portals by tourists by combining principles of storytelling. His area of research includes destination marketing and competitiveness, destination branding, destination storytelling, Creative Arts Marketing, and issues bordering on destination sustainability.
Isaac Bansah
PUBLICATIONS
- Exploiting the Usage of Mobile Agents as a Network Performance Monitoring Tool for Network Fault Management – an Alternative to Other Traditional Approaches. Authors: Isaac Bansah, Tonny Montana Adegboyega International Journal of Computer Applications (0975 – 8887) Volume 120 – No.3, June 2015.
- Implementation of Intrusion Detection System and Traffic Analysis – A case of a Linux Platform. Authors: Isaac Bansah, Tonny Montana Adegboyega, Stephen Brako Oti International Journal of Computer Applications (0975 – 8887) Volume 141 – No.7, May 2016.
- A configuration-based approach to Mitigating Man-In-The-Middle Attacks in Enterprise Cloud IaaS Networks running BGP. Authors: Oti, S. Bansah, I., & Adegboyega, T. M. International Journal of Computer Applications (0975 – 8887) Volume 146 – No.1, July 2016.
- Speaker, 14th Edition of ATU Library’s Webinar Series, Ensuring Academic Integrity in the Era of Artificial Intelligence – 2nd May, 2024.
- May 2024–Ongoing
- 2001–2006
- 1995–1998
- Artificial Intelligence
- Cyber Security
- Data Governance
- Data Communications and Networks
Mr. Martin Owusu Amoamah
QUALIFICATION
MSc (Statistics) 2004, UCC MPhil (Ind. Mathematics) 2011, KNUST B.Sc. (Statistics) 1996 UoGAREA OF SPECIALIZATION
Design and Analysis of Experiments, Statistical Methods
Dr Daniel Sarpong
During his 15 years of work experience, he has contributed to programs design, planning, implementation, management, monitoring and evaluation on the themes of Circular Rural/Urban Water and Sanitation, Circular Economy/Waste Recovery and Climate Change. In addition, he has provided strategic leadership and vision for a team of 25 to provide poor and marginalized communities with access to clean, safe water, improved sanitation, and hygiene (WASH) through culturally appropriate programs. Improving people’s health and livelihoods was central to this work.
After fulfilling several advisory or consultancy roles within international organizations such as UNICEF Nigeria and Ghana, AfDB, World Bank, GIZ, World Vision International – West Africa Region, WaterAid Ghana (as Head of Program), OXFAM GB, Plan International, to name only a few. Daniel now works mainly as a Researcher and continues to be a part-time Lecturer at Civil Engineering Department of the Accra Technical University, Ghana. He has supervised and mentored over 20 undergraduate students, 10 Master’s Students and 5 PhD students. Daniel has working experience across countries like Uganda, Kenya, Sierra Leone, Liberia, Mali, Niger, Chad, Rwanda, Nigeria and Ghana.
His great skills are human resources development, Financing/budgeting, capacity building of local government staff, NGOs, Private and Civil Society Organization is admirable. He is very sensitive to gender program design and implementation. Daniel has significant research prowess and has published a number of articles and reports in international journals.
MAKAFUI R. AGBOYI (MSC, MCIPS, CMILT, CPMP, FLC)
An experienced, self-motivated and positive-minded individual with over 18+ years of professional practice and developed skills in various capacities assumed. Her specialty is in Procurement and Supply Chain Management (MSC/MCIPS), Logistics & Transport (CMILT) and Project Management (CPMP).
A Consultant, Counselor, Mentor, Family Life Coach, orphanage archetypal and horticulturist. Successfully maintained regular communication and interpersonal skills to motivate and encourage people encountered around the world. Ensuring the youth/students (especially females) have an unswerving, focused, resilient attitude and mind to life’s encounters and the bid to triumph in set targets and goals. She has authored two (2) books; Bricks & Choices (inspirational/Motivational book) and Managing and Securing Supplies (Academic), and co-authored four (4) books with over fifteen (15) article publications cited by over 70 authors/researchers online, notably google scholar. Partnered and hosted personal programs at various seminars and talk shows aimed at the personal transformation of people at all levels, especially the youth/students, since 2012 on diverse topics such as Power of the Mind, Self-Worth & Value, Discovering Purpose, Life Skills, Wisdom Hunks, Business and Project Oriented Mindset. She mentors specifically young ones of all stages and interacts with people through developing thought-provoking content for over 1000’s on social media (Facebook & YouTube) and influences lives in diverse ways.
She believes and loves God, Jesus Christ and the Holy Spirit. She loves life and spirituality and treats people with respect, humility and integrity.
Ben Apau-Dadson
QUALIFICATION
M.Sc. Ind. Mathematics, KNUST, 2011 M.Sc. Statistics, UCC, 2007, B.Ed. Mathematics (2001) UEW Dip. Mathematics (2000) UEW Chartered Accountant, ICAG, 2013,
AREA OF SPECIALIZATION
Computational Mathematics, Optimization Techniques, Risk Management
Dr. Michael Addai
Ms. Charity Ahiabor
Dr. Charity A. Ahiabor is a dedicated and accomplished Senior Lecturer in the Department of Science Laboratory Technology, with a specialised focus on parasitology and the study of parasitic diseases that significantly impact public health. With a PhD in Parasitology from the Kwame Nkrumah University of Science and Technology (KNUST), Dr. Ahiabor’s career has been defined by a deep commitment to understanding the intricate dynamics between parasites and their hosts, as well as advancing the field of disease control and prevention.
Throughout her professional journey, she has engaged in extensive field and laboratory research, collecting and analysing samples from a diverse array of source – human, animal, and environmental – to explore the biology of parasitic infections. Their research interests span the epidemiology of parasitic diseases, host-parasite interactions, molecular parasitology, and vector biology, with particular emphasis on high-impact diseases such as malaria, schistosomiasis, and soil-transmitted helminthiasis (STHs). This multi-faceted approach aims to develop innovative strategies for controlling and preventing parasitic diseases, with an eye toward improving global health outcomes.
Dr. Ahiabor’s passion for research is matched only by her dedication to teaching and mentorship. As a lecturer in parasitology and microbiology, she has played a key role in shaping the academic careers of countless students, providing guidance and support through her research projects and academic development. Recognising the critical importance of passing on knowledge to the next generation of scientists, she is deeply committed to nurturing a learning environment that encourages enquiry, critical thinking, and practical application of scientific principles.
In addition to her teaching and research, she is an active member of the Ghana Science Association, staying engaged with the broader scientific community and contributing to the ongoing development of parasitological research both locally and internationally.
Through her work, she exemplifies the power of science to improve lives, balancing the demands of rigorous research with the rewards of mentoring young scientists and contributing to the broader fight against infectious diseases
Dr. Osei Antwi
QUALIFICATION
PhD Applied Mathematics, KNUST, 2018 MSc (Mathematics), 1999, KNUST MBA (Finance), 2004, USA MSc (Financial Modeling & Risk Mgt.), 2007, Brunel University, London B.Sc. Mathematics (1994) KNUST
AREA OF SPECIALIZATION
Financial Modelling, Risk Management, Application of Numerical Methods
Dr. Joseph Dadzie
Mrs. Lynda Dede Graham
Dr. Collins Kwaning
Collins Owusu Kwaning is a distinguished educationist and researcher with a wealth of expertise in the fields of Finance, Banking, and Entrepreneurship. With a deep commitment to advancing knowledge and practical application in these areas, he has contributed significantly to both academic research and the development of educational programmes. Currently, he serves as a Senior Lecturer and the Head of the Liberal Studies Department at Accra Technical University, where he plays a pivotal role in shaping the curriculum and guiding the academic growth of students.
Dr. Kwaning holds a PhD in Banking and Finance, underscoring his in-depth understanding of financial systems, banking operations, and their impact on economic development. In addition, he earned a Master’s degree in Banking and Finance, further strengthening his expertise in the financial sector. His academic foundation is complemented by a Bachelor of Education in Psychology and Business Management, which reflects his interdisciplinary approach to education and research, combining insights from psychology, business, and finance to inform his teaching and scholarly work.
With a passion for integrating theoretical knowledge with practical solutions, he is dedicated to fostering critical thinking and innovation in his students. His research interests span various topics within finance and entrepreneurship, focusing on areas that are crucial for the growth and sustainability of businesses and financial institutions. His work is not only relevant to academia but also contributes to the broader discourse on financial literacy, economic empowerment, and entrepreneurial development in both local and global contexts. As an academic and researcher, Dr. Kwaning is committed to mentoring the next generation of professionals and leaders, equipping them with the skills and knowledge needed to excel in the ever-evolving fields of finance, banking, and entrepreneurship.
Ing. Dr. Mark Pim-Wusu
Ing. Dr Pim-Wusu is a senior lecturer and researcher on environmentally sustainable construction, fire safety, building services and public health in construction to achieve the global agenda of sustainable development to improve Ghanaians’ lives, the African region and globally in the fourth industrial revolution era.
He is a Professional Engineer registered with the Ghana Institution of Engineering and the UK’s Chartered Association of Building Engineers. He holds PhD in Engineering Management (Construction) from the University of Johannesburg, South Africa.
He has been a lecturer in the Department of Building Technology, Faculty of Built Environment at the Accra Technical University since January 2013. Ing. Dr Pim-Wusu has lectured courses on building science, building services, building management, the environmental impact of construction activities, materials and construction technology, project administration and research methods at both undergraduate and postgraduate levels.
Dr. Stephen Bani
QUALIFICATION
PhD Applied Mathematics, KNUST, 2018 MSc (Mathematics), 1999, KNUST MBA (Finance), 2004, USA MSc (Financial Modeling & Risk Mgt.), 2007, Brunel University, London B.Sc. Mathematics (1994) KNUST
AREA OF SPECIALIZATION
Financial Modelling, Risk Management, Application of Numerical Methods
Dr. Henry Kwadwo Hackman
Ing Dr Prodeo Yao Agbotui
Ing Dr Prodeo Yao Agbotui (PE, MGhIE, MGhIG, MIAH, MLPS) had his BSc Civil Engineering degree (2006) from the KNUST, Kumasi, Ghana, and his MSc Hydrogeology (2010) & PhD Earth Science with specialty in Hydrogeology (2020) from the School of Earth and Environment, University of Leeds, Leeds UK, both under the Commonwealth Scholarship Scheme.
Prodeo is a professional civil engineer/ hydrogeologist academic and practitioner with extensive experience in: the design and implementation of fuel retail outlets, the design and evaluation of water supply projects and general civil engineering project planning, field hydrology/hydrogeological instrumentation, groundwater resource, contaminated land assessment, slope stability evaluation, geochemical characterisation of organic and inorganic contaminant plumes in groundwater. At the Civil Engineering Department of the ATU, he leads modules such as Engineering Hydrology, Soil and Rock Mechanics, Foundation Engineering and Geotechnical Engineering. He is also the Faculty of Engineering Research Coordinator and is responsible for planning and driving the research ethos of the faculty.
Ing Dr Prodeo Yao Agbotui is a Professional Engineer licensed by the Engineering Council of Ghana. Professionally, He is a member of: the Ghana Institution of Engineering; Ghana Institution of Geoscientists; International Association of Hydrogeologists; and the London Petrophysical Society.
He is also into private consulting and has worked with the Bureau of Public Safety (BPS) and the GreenAd, which are both Non-Governmental Organisations (NGOs). At the GreenAd, an environmental advocacy institution, he leads Groundwater Research and Contaminated Land projects for poverty alleviation.
Currently, his research interests focus on the: characterising catchment scale groundwater flow dynamics, use of open-well dilution testing to constrain flow horizons in tropical hard rock aquifers, the use of pharmaceutics and emerging contaminants to assess aquifer vulnerability and the potential of artificial recharge in Ghana. He is also interested in slope stability of slopes in Ghana and drainage capacity assessments of the urban environment.
Dr. Isaac Asempah
Dr. Asempah Isaac is an accomplished academic with a strong background in nanotechnology and materials science. His academic journey has been marked by a deep commitment to research and teaching, particularly in the development of thin films using Physical Vapour Deposition (PVD) techniques.
Dr. Asempah has significantly contributed to the academic community through his involvement in these fields, blending his extensive knowledge with practical insights to address complex scientific challenges. His research interests are primarily centered on nanotechnology, where he explores innovative approaches to advancing knowledge and developing cutting-edge solutions.
Dr. Peter Nyanor
Dr. Peter Nyanor is a distinguished Mechanical Engineering and Materials Science scholar, currently serving as the Director of Research, Innovation, Publication, and Technology Transfer (DRIPTT) at Accra Technical University (ATU). With over a decade of experience in academia and research, Dr. Nyanor is committed to fostering an environment that promotes innovation, collaboration, and practical solutions to real-world challenges.
A senior lecturer in engineering, Dr. Nyanor’s academic portfolio spans courses in Engineering Mechanics, Materials Science, and Solar Energy Engineering, reflecting his dedication to advancing technical education through both theory and hands-on application. His leadership has been instrumental in developing competency-based training (CBT) programmes, mentoring students, and driving curriculum reforms that align ATU’s offerings with industry needs.
Dr. Nyanor’s research is primarily focused on composite materials and finite element analysis (FEM) applications, with significant contributions to understanding and enhancing the mechanical properties of advanced materials like nano-reinforced aluminum composites. His work, published in top-tier journals and presented at international conferences, has positioned him as a recognized figure in material characterisation and mechanical simulation. As a reviewer for esteemed journals such as Materials Science (Springer) and Heat Transfer Engineering (Taylor & Francis), Dr. Nyanor contributes to the global advancement of engineering knowledge.
Under his leadership, DRIPTT has launched several initiatives, including an innovation fund to support faculty research, collaborations with industry, and monthly research bulletins. His strategic vision emphasises technical innovation and the importance of sustainable and industry-aligned research at ATU. Dr. Nyanor holds a PhD in Materials Science and Engineering from the Egypt-Japan University of Science and Technology (E-JUST) and an MSc in Computer-Aided Conception and Production from RWTH Aachen University, Germany.
Dr. Nyanor’s mission as Director of DRIPTT is to establish ATU as a hub for innovative research that drives socioeconomic impact, nurtures entrepreneurial spirit, and fosters an enduring research culture.
Dr. Mrs. Emma Donkor
Dr. Mrs. Emma Donkor, a distinguished fashion designer, educator, and scholar, brings over 25 years of experience to her role. Her wealth of knowledge has been instrumental in teaching, training, and mentoring aspiring fashion designers and interior decorators. She holds a PhD in Arts and Culture from the University of Education, Winneba, and specialises in fashion design, textiles, and garment construction.
As a senior faculty member at Accra Technical University (ATU), Dr. Donkor has demonstrated her leadership abilities through several key roles. She has served as the Head of the Department of Fashion Design and Textiles, departmental examinations officer, and academic counselor. Her supervision of numerous student projects and her pivotal role in designing academic and ceremonial gowns for the university(ATU), including the first academic gowns for the Rector and Registrar, are testament to her leadership skills. Her contributions also include organising renowned fashion shows, such as the Accra Technical University Fashion Show, which celebrate African heritage and culture.
Dr. Donkor’s research is a significant part of her academic contributions. Her work focuses on evaluating and advancing fashion education and production units in Ghanaian institutions. Her research interests span millinery and accessories, fashion accessory design, textiles, and dyeing. She has published extensively in peer-reviewed journals and actively participates in workshops and conferences, where she shares her knowledge and insights to enhance technical education and foster innovation in fashion design.
Dr. Donkor’s contributions extend beyond her academic work. She is an active member of various academic committees and boards at ATU, where her work supports the university’s mission to become a leading technical university in the region. Her dedication to mentorship and scholarship is evident in her interactions with students and colleagues, and her commitment to fostering innovation in fashion design continues to inspire.
Dr. Mrs. Cynthia Oduro-Nyarko
Dr. Mrs. Cynthia Oduro-Nyarko, currently the Head of the Department of Management and Public Administration, has over 18 years of working experience as a university lecturer with a secretaryship, entrepreneurship, and management background. She holds a Doctor of Philosophy (PhD) in Entrepreneurship Management from Universidad Empresarial de Costa Rica (UNEM). She also has a Master of Business Administration (MBA) in Entrepreneurship and Small Enterprise Development and a Bachelor of Arts (BA) in Secretaryship from the University of Cape Coast. She also holds a Diploma in Business Studies (DBS) in Secretaryship from Takoradi Technical University and a Certificate in Education (Cert.Ed.) from the University of Education, Winneba.
She joined the Faculty of Business at Accra Technical University in 2006 as a part-time teaching staff, then a full-time teaching staff from July 2007 to date. Her research interest is centred on Entrepreneurship and Small Enterprise Development, New Venture Creation and Management of New and Small Enterprises. She has worked in committees to develop technical proposals for business start-up projects and programme development for the university. She recently took part in ATU-MSM NUFFIC FUNDED TAILOR-MADE TRAINING (TMT) PROGRAMME for developing ATU staff competencies to design a Commercial Agri-Business course targeted at female entrepreneurs
She offers advisory and consultancy services on how to write an effective and marketable business plan, starting your own business, coaching on the entrepreneurial process, SME development, and career choice guidance. She has also spoken in churches and student bodies, organised women and youth groups, and runs workshops and seminars on the acquisition of entrepreneurial skills and the management of small businesses. Ultimately, her objective is to have theoretical and practical exposure to entrepreneurship and career advancement.
Hanson Obiri Yeboah
I am an experienced professional with a strong foundation in managing projects, resources, and teams with efficiency and precision. With a comprehensive understanding of supply chain management and information technology, I bring a focused and results-driven approach to my work. Currently, I serve as the Head of the Procurement and Supply Chain Department and a Senior Lecturer, where I am dedicated to advancing best practices in supply chain and logistics.
My academic qualifications – a Bachelor of Science in Information Technology and a Master of Science in Supply Chain Management (Distinction) – alongside my status as a full Member of the Chartered Institute of Logistics and Transport (MILT), UK, underscore my expertise in the field. I am committed to applying my skills and knowledge to foster organisational growth and drive operational excellence in the supply chain sector.
Prof. Alice Constance Mensah
QUALIFICATION
PhD (Applied Statistics) 2013, UDS M.Sc. Statistics (2004) UCC Postgrad Dip. Education (2000) UCC BA. Economics & Statistics, (1994), UoG
AREA OF SPECIALIZATION
Biostatistics, Sampling Techniques, Demographic Techniques
Professor Felix Y.H. Kutsanedzie
Engr. Prof Felix Y.H. Kutsanedzie is a full professor in agricultural and biosystems engineering at Accra Technical University and a member of the Mechanical Engineering Department., and a professional engineer licensed under the division of Agricultural and Bioengineering. He was appointed Acting Pro-Vice-Chancellor on March 11, 2024.
He is a prolific researcher and writer who has several genres of publications such as short communications; reviewer papers, edited book chapters; edited books with chapters; conferences papers, and peer-reviewed papers in the Science Citation Index (SCI) and Engineering Village Index (EI) journals retrievable from the World of Science (WoS) spanning his areas of research interest and focus. He has a specialty in fabrication of nondestructive sensing technologies – near-infrared, ultraviolet-visible and Raman spectroscopic systems, hyperspectral imaging and multispectral imaging systems, colourimetric sensors, electronic nose (e-nose) devices, electronic tongues (e-tongue) devices, computer vision, biosensors, upconversion and surface-enhanced spectroscopy (SERS) nanosensors for which his works have been world-widely published and received awards. His novel work, published in the Sensors and Actuators B: Chemical Journal, on the development of a sensing probe composed of porphyrin-based chemodyes coupled to a near-infrared spectrophotometer and supported by chemometric algorithms pioneered the re-engineering of near-infrared spectroscopy systems for detection of gaseous substances – volatile, which hitherto could detect only solid and liquid matter.
Engr. Prof. Kutsanedzie has garnered twelve (12) years teaching experience at the tertiary level, with a research interest in areas such as: designing and fabrication of microelectromechanical machines (MEMS) or devices / lab-on-chip devices; sensors fabrication for quality and safety monitoring of biomaterials, food, environment, biomedical and pharmaceutical materials; synthesis and fabrication of nanomaterial and biomaterial based devices for varied uses – bio and biomedical imaging, biosensing; bionanotechnology, fabrication of devices coupled to chemometric algorithms for nondestructive detection of materials; application of multivariate algorithms for image and spectral data preprocessing and processing; food processing and biosystems designs; food-water waste treatment and management systems designs; renewal energy systems; bioenergy and biofuel generation; project management; experimental designs and analysis. He held several scholarships – Government of Ghana Scholarship at the secondary school level (1995 – 1997); Jiangsu Presidential Scholarship (2015-2015), Jiawen Fellowships Award in recognition of Excellence Academic Performance (2018), JU – China, Food and Biological Engineering School Scholarship (2015-2018). Engr. Prof. Kutsanedzie received the best PhD student’s dissertation and outstanding award, from Jiangsu University in 2018 (JU), China. He has in addition received the best poster, academic star and fellowship awards from JU. Coupled to these, he has written and won several grants; supervised several Higher National Diploma and Degree students’ projects and ten (10) postgraduate students project – both masters and doctorate degree dissertations.
Engr. Prof. Felix Y.H. Kutsanedzie is currently the Dean of the Faculty of Engineering, Accra Technical University. Prior to that, he held the following positions – Head, Research and Innovation Centre (2013 – 2015); and Drone and Innovative Technologies Development Centre (2018 -2021). He has served on several committees to share his expertise and as well contributed in many research conferences both on community, institutional, national and international platforms. He served as an Associate Editor for the Directory of Open Journals (DOAJ) from 2015-2017, Liaison for functional food in Africa Universities (2012-2016), Editor of APT Multidisciplinary Journal; Editor for PLoS One; Editor for BioMed Research International Journal; Associate Editor of Frontiers Sensors; and currently a certified Elsevier peer-reviewer and a member on the Committee for Publishing Ethics (COPE). Additionally, is currently the editor of Editor of Advances in Nanowires Synthesis and Applications to Sensing Technologies [Book], Intech Open Publishers, UK, which is expected to be launched later in 2022.
He is a member of the America Society for Agricultural and Biological Engineers, National Black Engineers Society; Society for Biological Engineers; Institute of Engineering and Technology (IET-GH); Council for Institute of Engineering and Technology (IET-GH); Ghana Engineering Council Disciplinary, Legal and Ethics Technical Committee and Ghana Society of Agricultural Engineering (GSAE). Prof. Kutsanedzie is ranked the National Best Scientist in the Agricultural and Biosystems Engineering, 10th in Africa, and 68th in the World based on the World Scientist and University Rankings by AD Scientific Index (Alper-Doger Scientific Index) 2023 – https://www. adscientificindex.com/scientist/felix-yh-kutsanedzie /4 313486 The links, code and ID below provides details of Prof. Felix Y. H. Kutsanedzie’s publications:
- Google Scholar – https://scholar.google.com/citations?user=zFiIqukAAAAJ&hl=en&oi=ao
- ORCIDNumber:
- Scopus ID: Scopus Author ID: 57188565218
Dr. Isaac Aidoo
Isaac Aidoo is a Senior Lecturer and currently the Head of Department for Interior Design and Upholstery Technology at Accra Technical University. He joined the Building Technology of Accra Technical University in January 2017. He holds BSc (Hons) in Building Technology, Master of Philosophy and PhD degrees in Construction Management with extensive industry and research experience in Construction Management.
His teaching and research interests include Building Technology, Construction Management, Health and Safety Management, Quality Management and Environmental Impact of Construction Activities and Research Methodology.
He is a member of the Institution of Engineering and Technology (IET), Ghana. He is also a member of the Technical Committee on cement (TC11) at The Ghana Standard Authority.
Prof. Phyllis Naa Yarley Otu
Professor Otu is a Food Science Engineer whose research focus includes the extraction of bioactive compounds from plants for food, pharmaceutical and cosmetic product development. She has led investigations of polysaccharides extraction from Sorghum bicolour L. and Moringa oleifera Lam. dried leaves using aqueous/ ionic liquid aqueous two-phase system and ultrasound technology and has served as PI on ARIF grant on the usage of bioactive Ghanaian wild mushroom in the development of anti-cancer snacks.
Professor Otu has currently authored and co-authored 18 SCI publications with 282 citations. She is the author of “Reviews on mechanisms of in vitro antioxidant, antibacterial and anticancer activities of water-soluble plant polysaccharides” and “Sorghum Bicolor L. leaf sheath polysaccharides: Dual frequency ultrasound-assisted extraction and desalination”. Ongoing is research on the development of soap and cream with dried Phyllantus nuriri and Azadirachta indica leaves. She serves on academic, faculty and departmental boards. She is also a cognate representative of the Faculty of Built Environment, Accra Technical University, an external verifier for the Commission for Technical & Vocational Education and Training, a reviewer of the Journal of Food Science and Technology International, an academic counsellor, a member of Departmental advisory curriculum development and Quality assurance committees.
Professor Otu served as a cognate member of the Board of Engineering, secretary of PTA Executives, Oasis Montessori and Senior Coordinator of Vacation Bible School and Young Generation Department, Calvary Baptist Church.
Professor Otu graduated from Jiangsu University, Zhenjiang Province, China, in June 2022 and received her PhD. in Food Science and Engineering from the School of Food and Biological Engineering, in December 2021. She also received her second degree in MSc. Food Science and Technology and her first degree in BSc. Biological Sciences from KNUST in 2010 and 2005 respectively.
Mr. Seth Emmanuel Adotei Allotey
Seth Emmanuel Adotei Allotey is a Senior Lecturer in the Department of Building Technology, and currently the Dean of Student Affairs at Accra Technical University. He has over twenty-four years of experience in academia and professional construction practice. He has a strong sense of alignment with the university’s vision and values. He is down to earth and possesses the ability to work positively with staff and students from a diverse range of backgrounds.
He has over ten years in leadership positions at the university and has demonstrated experience in leading effective change in his department and faculty. He has a track record, demonstrated over ten years of conducting research or community service in disciplines appropriate to the work of the department, faculty and the university. His research interests are in Construction Resource Management, Building Maintenance and Economics. He is also a Corporate Member of the Ghana Institution of Builders.
Prof. Frank Opuni
Professor Opuni holds a PhD in Business and Management (Marketing Specialisation) from the Greater Manchester University, UK, an MBA in Marketing from the Kwame Nkrumah University of Science and Technology, and a B.Ed. in Psychology from the University of Cape Coast. His interdisciplinary research has led to over 40 peer-reviewed publications in reputable journals such as Elsevier, Springer, and Taylor & Francis, with 17 indexed in the Scopus database, where he has a Scopus h-index of 6 and 103 citations (excluding self-citations). Per Google Scholar records, he has an h-index of 12, an i10-index of 12, and has garnered 342 citations. His ResearchGate profile reflects 41 publications, 238 citations, and a research interest score of 355.2 with over 18,000 reads. Additionally, the AD Scientific Index reports an h-index of 9 and 261 citations, highlighting his research impact. In his administrative roles at ATU, Professor Opuni has previously served as Coordinator of the Graduate School, Head of the Teaching and Learning Centre, Head of the Quality Assurance Department and Head of the Marketing Department. He has supervised several postgraduate theses for institutions like KNUST and taught undergraduate students from the Hague University of Applied Sciences.
His commitment to academic leadership is further demonstrated through his co-facilitation of international research bootcamps aimed at nurturing early-career researchers. Based on his expertise in advanced quantitative modelling, Professor Opuni has applied cutting-edge tools such as Structural Equation Modelling (SEM-PLS and AMOS), Artificial Neural Networks (ANN), fuzzy-set Qualitative Comparative Analysis (fsQCA), and Necessary Condition Analysis to produce internationally recognised research outputs. Through Nexus Global Research Consult and the ACE research network, he has trained dozens of African faculty members in advanced research design, analytics, and publication strategies—improving the quality and impact of research across the continent. By providing mentorship, coaching, and training for several African faculty under the ACE research network, a good number of these have completed their PhDs and substantially increased their research impact. Professor Opuni’s research excellence has been recognised through prestigious grants, including a £120,000 British Council Innovation for African Universities grant and the Erasmus Mundus grants for academic exchange with The Hague University of Applied Sciences. He has presented his work at international conferences such as the California Entrepreneurship Educators Conference and the British Council-sponsored IAU Conference at Huddersfield University, UK. His professional affiliations include Fellowship with the Global Strategic Management Institute (USA) and the Institute of Certified Economists, Ghana, as well as Associate Membership with the Chartered Institute of Marketing, Ghana.
Dedicated to advancing research that aligns with the UN Sustainable Development Goals, Professor Opuni continues to influence policy and practice through interdisciplinary inquiry and global academic collaborations. His leadership at ATU exemplifies a commitment to excellence in higher education and a vision for impactful research that addresses pressing societal challenges
Dr Jones Ntiamoah
Professor Jones Adjei Ntiamoah (ACMA, CGMA) is a Senior Lecturer at the Department of Accounting and Finance, Accra Technical University.
Dr. Ntiamoah holds a Doctor of Finance degree from the Swiss Management Center in Switzerland, a Master of Finance degree from the University of Leicester, United Kingdom, and a Bachelor’s degree from the University of Ghana Business School. He is a member of the Chartered Institute of Management Accountants (CIMA, UK), a Chartered Global Management Accountant (CGMA) and a member of the Institute of Chartered Accountants, Ghana (ICAG).
He was once the Dean of the Faculty of Business, Accra Technical University. Before that, he was the Dean of International Programmes and Institutional Cooperation at Accra Technical University, a former Head of the Budget Department of Ghana Revenue Authority (GRA), Domestic Tax Revenue Division, and Director of Finance at the Spirits Petroleum Ltd, Tema.
Dr. Ntiamoah was once the Head of the Business Studies Department at Regional Maritime University whilst on sabbatical leave from Accra Technical University. He was also a Board Member of Accra Technical University Governing Council from 2014-2020 and served on several statutory committees of Accra Technical University and Regional Maritime University.
His research interests are in tax compliance, cross-border taxation and taxation involving digital transactions. He has several peer-reviewed publications in recognized academic journals in Taxation, Finance and Accounting.
He currently lectures Taxation and Accounting at Accra Technical University. He is also an adjunct lecturer in International Finance in the MSc International Shipping and Logistics Programme at the Regional Maritime University, Accra, Ghana.
Prof. Elikem Chosniel Ocloo
Prof. Elikem Chosniel Ocloo is an Associate Professor in Marketing and the Dean of the Faculty of Business at Accra Technical University. Prof. Ocloo was appointed as a Lecturer in September 2010. He received his Bachelor of Arts (B.A) Degree from the University of Ghana and also holds a Master’s degree in Business Administration (Marketing option) from the University of Leicester, UK. In 2019, he graduated successfully with a Doctor of Philosophy (PhD) Degree in Management Science and Engineering (Marketing focused) from Jiangsu University, China.
He is an Associate Member of the Chartered Institute of Marketing Ghana (CIMG). He has considerable experience in teaching and research both in academia and industry. Prior to his appointment as the Dean in September 2024, Prof. Ocloo held the position as the Head of the Marketing Department from November, 2020 to July 2024. As Head of Department, he has successfully spearheaded the accreditation and reaccreditation of undergraduate and graduate programmes in Marketing. He is a Facilitator, Mentor and Coach for ATU’s International Exchange programmes and has presented papers at local and international conferences including workshops. Prof. Ocloo serves/has served on several committees and boards and he is an External Assessor/Examiner for Ghana Tertiary Education Commission (GTEC), Lancaster University Ghana, SD Dombo University of Business and Integrated Development and Takoradi Technical University.
His research interests include E-Business, Social Marketing, Social Enterprise/SME Development, Brands Management and Social Media Marketing and Marketing Management. Prof. Ocloo has peer-reviewed articles published in top-ranking journals and book chapters such as Taylor & Francis, Springer, IGI Global, Sage, and Oxford University Press (indexed by Web of Science, SSCI, Scopus). He is a reviewer for Education Sciences (MDPI), Cogent Business and Management, Journal of Global Entrepreneurship among others.
Dr. Peter Arhenful
Professor Peter Arhenful is an Associate Professor in Economics, Accounting and Finance Department, Faculty of Business, Accra Technical, with over eighteen years of tertiary teaching experience. He holds a PhD from Ghana Communication Technology University in Accra & CASS European Institute of Management Studies in Paris, as well as an MSc in Accounting and Finance, MA in Economics, and a BA in Economics and French from Kwame Nkrumah University of Science and Technology (KNUST) in Kumasi, Ghana.
Professor Peter Arhenful has served as Departmental Examinations Officer, Head of Accounting and Finance Department, Acting Dean of the Faculty of Business, and Head of Accreditation Department at Accra Technical University.
He is currently the Dean of International Programmes & Institutional Cooperation. He has also chaired some committees and served on the Academic Board and other ad hoc and standing committees, including the Development Committee of the Governing Council of Accra Technical University. His research interests include risk management practices of universal banks, monetary policy, and economic growth.
Dr. Bernard M. Arthur-Aidoo
Dr. Bernard Martin Arthur-Aidoo is a registered member of Ghana Institute of Construction
(GhIoC), America Society of Civil Engineers (ASCE) and Association of South African Quantity Surveyors (ASAQSM). He had his educational training with top-notch institutions such as the University of Johannesburg in 2018, University of Westminster in 2006 and Accra Polytechnic in 2000 where he studied various courses in the field of construction technology and the built environment.
Dr. Arthur-Aidoo is a multi-disciplinary built environment researcher in the growth of small and medium-sized construction firms. Further, his additional specialties include quantity surveying, project management, and proposal development for small and medium-sized firms. Dr. Arthur-Aidoo is a member in good standing of the Ghana Institute of Construction, GhIOC. He has also worked within the construction industry as a Project Quantity Surveyor with the Ghana Highways Authority and as a project coordinator on various construction projects. Dr. Arthur-Aidoo is a perceptive lecturer who has supervised the thesis and project works of five (5) PhD students and four (4) students from the University of Johannesburg and with over twenty (25) Higher National final year students in Accra Technical University. Dr. Arthur-Aidoo is a prolific reviewer working with both local and international journals within the construction space.
He was the former Head of Department of the Building Technology from August 2020 to August 2022 and currently the Dean of the Faculty of Built Environment. He has to his credit over seven (7) current research publications.
Notable Publications
Arthur-Aidoo, B. M., Quartey, P. N.K., Perry Ransgreg Nunoo, P. R. and Adzinku, A. K. (2024), Breaking Ground Empowering Women in the Construction Industry. Emerald Publishers. Leeds https://doi.org/10.1108/978-1-83549-638-120241003
Arthur-Aidoo, B.M. Simpeh, E. K., Yeboah, M. Issoumiala, Y. (2024) Improving Communication on Construction Sites: A case of selected Construction SMES in Ghana. Journal of Science and Technology, Vol. 42, No.3 pp118 – 134.
Arthur-Aidoo, B. M., Coffie, H. G., Abeka, H. K., Osae-Ansah, T. and Ametsikor, K. (2023) Theft and Vandalism Control Measures on Construction Sites, African Journal of Applied Research Vol. 9, No. 2 (2023), pp. 284-301.
Clinton Aigbavboa and Lawrence Yao Addo, Andrew Ebekozien, Wellington Didibhuku Thwala and Bernard Martins Arthur-Aidoo, (2023). Developing a framework for effective institutional management of Ghana’s urban water supply, International Journal of Building Pathology and Adaptation, Emerald Publishing Limited 2398-4708.
Clinton Aigbavboa and Lawrence Yao Addo, Andrew Ebekozien, Wellington Didibhuku Thwala, and Bernard Martins Arthur-Aidoo (2023). Appraising institutional management of urban water supply in Ghana: the role of the stakeholders, Journal of Facilities Management Emerald Publishing Limited 1472-5967.
Clinton Aigbavboa, Andrew Ebekozien, Emmanuel Kofi Afetorgbor, Bernard Martins Arthur-Aidoo and Wellington Didibhuku Thwala (2023). Investigating the barriers facing corporate social responsibility in the built environment: Ghana’s perspective from a qualitative approach, Property Management ©Emerald Publishing Limited 0263-7472.
Arthur-Aidoo, B. M., Aigbavboa, C. O. and Thwala, W. D. (2018). Evaluating Entrepreneurial features of the firm’s growth using confirmatory factor analysis, Journal of Economics and Behavioral Studies, (9)3, 171-179.
Arthur-Aidoo, B. M., Aigbavboa, C. O. and Thwala, W. D. (2018). Exploratory Factor Analysis on Drivers of the Firm’s Growth among Construction SMEs in Ghana, African Journal of Science, Technology, Innovation and Development,
Dr. Tina Dzigbordi Wemegah
Surv. Dr. Tina D. Wemegah is a senior lecturer at the Accra Technical University and currently the Head of Department of the Civil Engineering Department.
Surv. Dr. Tina Dzigbordi Wemegah holds a Doctor of Philosophy Degree (PhD) from the Wuhan University of Science and Technology, China in Traffic and Transportation Engineering. Her PhD work involved using Geographic Information System (GIS) and big data in inferring road traffic patterns and vehicular movements. She holds a Master’s Degree from International Institute for Geoinformation Science and Earth Observation, Netherlands in Geo-Information Science with specialisation in Photogrammetry and Remote Sensing and a BSc Degree in Geomatic Engineering from KNUST. She has authored many articles in international journals and conference proceedings. Her research area is in using geoinformation technologies and methods in performing traffic analysis. Her expertise are spans across transportation engineering, engineering and land surveying, GIS and remote sensing and photogrammetry.
She has been involved in many national projects, notable amongst them are : Digital Mapping and Topographic Survey for Ghana, Early Phase Gas Infrastructure Project , Forestry Preservation Program –Making Ghana Ready for REDD +, Customary Boundary Demarcation of Ejisu in the Ashanti Region under the Ghana Land Administration Project of the Ministry of Lands, Forestry and Mines, Inventory of state Lands and provision of map of all state lands in the Atwima Nwabiagya District in the Ashanti Region, National Feeder Roads Inventory for Ministry of Roads and Transport, Department of Feeder Roads, Ghana, Digital mapping and provision of orthophotos in the Land Administration Project and Large scale mapping of Accra.
Prof. George Osei-Adjei (PhD)
Professor George Osei Adjei is a registered member of the America Society for Microbiology (ASM) and Allied Health Professions Council (AHPC), Ghana. He has had training with top-notch institutions such as the German Cancer Research Centre, Heidelberg and the Biochemistry Centre, University of Heidelberg, Germany, Noguchi Memorial Institute for Medical Research, Center for Plant Plant Medicine Research, Mampong Akuapem, where he embarked on various research in the field of Microbiology, Molecular Biology and Biochemistry.
He is a PhD holder in (Clinical Laboratory Diagnostics: Microbiology and Molecular Biology) from the Jiangsu University, P.R. China, School of Medicine, Biochemistry and Molecular Department under the supervision of Prof. Huang Xinxiang.
His career path and progress has been characterised by hard work and dedication to work. From a biology teacher and a research assistant at some point in his life, he joined Accra Technical University as a lecturer in Microbiology, Molecular Diagnostics/Cell Biology and Genetics in July 2011.
He received his Bachelor of Science (Biological) from the University of Cape Coast and MSc. In Clinical Microbiology from the Kwame Nkrumah University of Science and Technology.
He was the former Head of Department of Science Laboratory Technology from August 2019 to December 2020 and currently the Dean of the Faculty of Applied Arts. He has to his credit over twenty (20) research publications.
Notable Publications
1) Osae, R., Alolga, R.N., Essilfie, G., Osei-Adjei, G., Baduweh, C.A., Otu, P.N.Y., and Zhou, C. (2020). Variation in bioactive phytochemicals and sensory attributes of osmosonic convective dried ginger from four African countries. J. Sci. Food Agric. 100: pp 3164–3172. DOI 10.1002/jsfa.10351
2) Alolga, R.N., Chavez-Leona, M.A.S.C., Osei-Adjei, G., and Onoja, V. (2019). GC-MS-based metabolomics, antibacterial and anti-inflammatory investigations to characterize the quality of essential oil obtained from dried Xylopia aethiopica fruits from Ghana and Nigeria. Journal of Pharmacy and Pharmacology. 71 pp. 1544–1552. http://DOI: 10.1111/jphp.13150
3) Zhang, Y., Hu, L., Qiu, Y., Osei-Adjei, G., Tang, H., Zhang, Y., Zhang, Rui., Sheng, X., Xu, S., Yang, H., Yin, Z., Yang, R., Huang, X., and Zhou, D. (2019). QsvR integrates into quorum sensing circuit to control Vibrio parahaemolyticus virulence. Environ microbiol. https://doi.org/10.1111/1462-2920.14524
4) Zhang, Y., Chong, X., Xia, L., Lu, R., Osei-Adjei, G., Zhang, Y., and Huang, X. (2018). OxyR positively and directly regulates Vi polysaccharide capsular antigen in Salmonella enterica serovar Typhi. Microb Pathog, DOI: 10.1016/j.micpath.2018.08.050
5) Zhang, Y., Hu, L., Osei-Adjei, G., Zhang, Y., Yang, W., Yin, Z., Lu, R., Sheng, X., Yang, R., Huang, X., and Zhou. D. (2018). Autoregulation of ToxR and its regulatory actions on major virulence gene loci in V. parahaemolyticus. Front. Cell. Infect. Microbiol, 8:291.
6) Osei-Adjei, G., Huang, X., and Zhang, Y. (2018). The extracellular proteases produced by Vibrio parahaemolyticus. World J Microbiol Biotechnol, 34(5):68.
7) Lu, R., Osei-Adjei, G., Huang, X., and Zhang, Y. (2018). Role and regulation of the orphan AphA protein of quorum sensing in pathogenic Vibrios. Future Microbiol, 13:383-391.
8) Zhao, X., Liu R, Tang H., Osei-Adjei, G., Xu, S., Zhang, Y., and Huang, X. (2018). A 3’UTR-derived non-coding RNA RibS increases expression of cfa and promotes biofilm formation in Salmonella enterica serovar Typhi. Res Microbiol, 169(6):279-288.
9) Zhang, Y., Xia, L., Lin, L., Tang, H., Osei-Adjei, G., Xu, S., Zhang, Y., and Huang, X. (2018). Reciprocal regulation of OmpR and Hfq and their regulatory actions on the Vi polysaccharide capsular antigen in Salmonella enterica Serovar Typhi. Curr Microbiol, 75(6):773-778.
10) Osei-Adjei, G., Gao, H., Zhang, Y., Zhang, L., Yang, W., Yang, H., Yin, Z., Huang, X., Zhang, Y., and Zhou, D. (2017). Regulatory actions of ToxR and CalR on their own genes and type III secretion system 1 in Vibrio parahaemolyticus. Oncotarget, 8(39):65809-65822. (SCI, IF = 5.168).
11) Gao, H., Zhang, L., Osei‐Adjei, G., Yang, W., Zhou, D., Huang, X., Yang, H., Yin, Z., and Zhang, Y. (2017). Transcriptional regulation of cpsQ‐mfpABC and mfpABC by CalR in Vibrio parahaemolyticus. Microbiol Open, 6(4): e00470
12) Zhang, L., Osei-Adjei, G., Zhang, Y., Gao, H., Yang, W., Zhou, D., Huang, X., Yang, H., and Zhang, Y. (2017). CalR is required for the expression of T6SS2 and the adhesion of Vibrio parahaemolyticus to HeLa cells. Arch Microbiol, 199(6):931-938.
13) Zhang, Y., Gao, H., Osei-Adjei, G., Zhang, Y., Yang, W., Yang, H., Yin, Z., Huang, X., and Zhou, D. (2017). Transcriptional Regulation of the Type VI Secretion System 1 Genes by Quorum Sensing and ToxR in Vibrio parahaemolyticus. Front Microbiol, 8, 2005.
14) Zhang, Y., Yan, D., Xia, L., Zhao, X., Osei-Adjei, G., Xu, S., Sheng, S., and Huang, X. (2016). The malS-5’UTR regulates hisG, a key gene in the histidine biosynthetic pathway in Salmonella enterica serovar Typhi. Can J. Microbiol, 63:287-285.
15) Zhang, Y., Osei-Adjei, G., Ni, B., Fang, H., Zhang, L., Zhao, X., Huang, X., Yang, H., Yang, W., and Sun, F. (2016). Transcription of exsD is repressed directly by H-NS in Vibrio parahaemolyticus. Microb Pathog, 97:221-225.
16) Gordon, A., Asante, S.B., Bukari, Y., Gati, L., Osei-Adjei, G., Hackman, H.K., and Asare, E.O. (2015). Method Development and Validation for Hydroxyurea in Fixed Oral Solid Dosage Forms Using RPHPLC With DAD Detection. J. Applied Res. Vol.1, No.07,235-242.
Prof. Nana Yaw Asabere (PhD)
Prof. Nana Yaw Asabere is an Associate Professor in the Computer Science Department and serves as the Dean of the Faculty of Applied Sciences at Accra Technical University (ATU), Ghana. He graduated from Kwame Nkrumah University of Science and Technology in Kumasi, Ghana, in 2005 with a Bachelor of Science (B.Sc.) in Computer Science (CS) and from Aalborg University in Aalborg, Denmark, in 2010 with a Master of Science (MSc.) in Information and Communication Technologies (ICT). In addition, he received a Full Scholarship from the Chinese Government via the Chinese Scholarship Council (CSC) in September 2011 to pursue a Doctor of Philosophy (PhD) in Computer Science at Dalian University of Technology, China and completed it in September 2014. During his PhD, he developed and evaluated five (5) different algorithms (pseudocodes) to solve three (3) major scientific problems related to Socially-Aware Recommendations in Smart Conferences.
Prof. Asabere has six (6) years of academic leadership experience at the tertiary level of education in Ghana, along with eighteen (18) years of teaching (graduate and undergraduate levels), research, and research project supervision experience. He has served in various capacities at ATU, including Director—Directorate of Research, Innovation, Publication, and Technology Transfer (DRIPTT), HOD Computer Science Department, Coordinator/Head of the Department for Non-Tertiary and Professional Programmes, and Examinations Officer, Computer Science Department.
Prof. Asabere has several publications in respectable, high-impact journals and conference proceedings from IEEE, ACM, Wiley, and IGI Global, all of which are indexed in Web of Science and Scopus, as illustrated in Section I.3 of this document. He currently has 474 citations in Scopus (h-index = 12) and 874 citations in Google Scholar (h-index = 15, i10 index = 16) for research articles. He presently has 897 citations, an h-index of seventeen (17), and an 18.54 RG Score (Impact Points) in Research Gate. In addition, his Web of Science Researcher Profile shows an h-index of eleven (11).
Currently, Prof. Asabere is interested in teaching and technological research in the following areas: software engineering, artificial intelligence, data science, big data, mobile and social recommender systems, and ICT in education (e-learning and m-learning). As a component of his Ph.D. study and thesis, he received the Best Paper Award at the 10th IEEE International Conference on Ubiquitous Intelligence and Computing (2013). Furthermore, at the 7th IEEE International Conference on Adaptive Science & Technology (2018), he received the Best Paper Award. In addition to being an editor, Prof. Asabere reviews several computer science journals and conference proceedings, such as IEEE Transactions/Systems Journal, Proceedings of the WWW International Conference (ACM), ACM Transactions on Multimedia Computing, Communications and Applications, and Frontiers in Big Data. Additionally, he has served as a Technical Program Committee (TPC) member of all Workshops on Big Scholarly Data since its commencement in 2013.
Prof. Asabere is currently a member of IEEE, the IEEE Computational Intelligence Society (CIS), and the Institute of ICT Professionals Ghana (IIPGh). He financially mobilised €200,000 through the AFOS Foundation for Entrepreneurial Development Cooperation to oversee ATU’s Digital Capacity (DigiCAP) Training Program. Prof. Asabere also provides or has provided local consultations for the Ghana Tertiary Education Commission (GTEC) and Commission for Technical and Vocational Education and Training (CTVET), as well as international consultations for the United Nations (UN) Global Pulse (Report on AI Ecosystem Mapping in Ghana).
Professor Amevi Acakpovi
Engr. Prof. Amevi Acakpovi is a Professor in the Electrical/Electronic Engineering Department at Accra Technical University. He is also a Graduate (MSc/MPhil) Supervisor/External Assessor at the Faculty of Telecommunications, Ghana Technology University College (GTUC) and an External Researcher in the Laboratory of Applied Energetic and Mechanics (LEMA) at the Polytechnic of Abomey-Calavi (EPAC), University of Abomey-Calavi (UAC), Cotonou, Bénin.
He received a Bachelor of Science Degree in Computer and Electrical Engineering from the Lokossa Institute of Technology (Republic of Benin) in 2006 and a Certificate of Designer Engineer (Eq. MSc.) in Electrical Engineering Option Control of Industrial Process from the Abomey-Calavi University (Republic of Benin) in 2009.
Prof. Acakpovi further pursued a PhD degree in Energy Systems Engineering from a joint collaboration between the Open University Malaysia and the Accra Institute of Technology in Accra, Ghana from 2011 to 2017. During his PhD studies,
Prof. Acakpovi developed and implemented with software, prominent solutions to cost optimization problem of Hybrid Energy Systems (HES) using metaheuristic optimization techniques like particle swarm optimization and additionally developed and tested a general framework for optimizing HES. Dr. Acakpovi is the author of a number of publications in International Journals including IEEE conferences, and transactions as well as other SCI-Indexed and EI-Indexed journals.
Prof. Amevi Acakpovi is currently the Pro-Vice-Chancellor of Accra Technical University since December 2020, a position he occupied in the past from June 01 to July 02, 2019 and June 01 to November 30, 2020. Some of the prominent positions he occupied recently in the University include Dean of the Faculty of Engineering (2018-2020) and Head of the Electrical/Electronics Engineering Department (2012-2018).
As part of his academic leadership, Prof. Acakpovi led various teams to submit a number of proposal for grants, some of which were successful. He is a winner of COTVET grant for skill development project windows 2, year 2018 and has also won a number of grants and awards to attend short pieces of training abroad. He is currently leading a team of Engineers to apply for the Government of USA grant through MIDA for the development of an Energy Service Centre in Ghana which is worth USD 3,300.000.
Prof. Acakpovi was highly instrumental for the Faculty of Engineering and the University at large, in developing accreditation documents for both NCTE and NAB. He led a number of accreditation processes successfully. His contributions in developing proposals, conducting workshops on CBT curriculum development, meeting the accreditation teams, and mounting and defending new programmes were favourably appreciated by the University community. Additionally, Prof. Acakpovi took part of a number of international events that uplifted the image of his department and the University at large. Some of these included his participation in the World Skill International in Kazan, Russia as Electrical Representative for Ghana, the Off-grid conference in Stuttgart, Germany to mention but a few.
Besides, Prof. Acakpovi has acquired great experience in teaching and learning at the Graduate level. He has extensively taught Master’s level courses and supervised more than fifty (50) MSc. theses from various recognized Universities. He is handling five (5) PhD thesis from the Open University of Malaysia / Accra Institute of Technology and has been selected at multiple occasions as an External PhD thesis moderator for an Engineering thesis at the University of Johannesburg in South Africa.
Prof. Acakpovi was a recipient of the SILVER AWARD – Engineering, Science, Technology & Innovation in October 2014 at the International Research Initiative Conference (IRIC) in Accra, Ghana. He also received in 2012 an Award of Innovation in Engineering at the 1st Applied Research Conference in Africa (ARCA), in August 2012 at Cape Coast, Ghana. In addition, Prof. Acakpovi received in 2018, the Best Paper Award at the 7th IEEE International Conference on Adaptive Science and Technology and subsequently the best track paper award in project management at the IEOM conference in South Africa in 2018. Prof. Acakpovi is the reviewer of many journals including IEEE transaction in Sustainable Energy, International Journal of Renewable Energy Researcher (IJRER), the Journal of Energy (Elsevier/Science Direct) and many others. His current research interests include Hybrid Energy Systems, Mini and Microgrid Optimization, Smart Grid Modelling and Optimization, Solar and Wind Energy Modelling and Optimization, Artificial Intelligence in Energy Systems and Recommender Systems.
Prof. Amevi Acakpovi has recently been upgraded to the senior membership of the Institute of Electrical and Electronic Engineering (IEEE) since 2019 and he is also a member and head of the Electrical Division of the Institution of Engineering and Technology (IET), Ghana. Dr Acakpovi is also the Elected Vice President of the International Electrotechnical Commission (IEC) Ghana Chapter and a Consultant to the Ghana Standard Authority for the review of Electrotechnical Standards. Finally, Prof. Acakpovi is the elected president of the Technical Committee 77, on Electromagnetic Compatibility (EMC) that reports to the African Electrotechnical Standardisation Commission (AFSEC), a branch of the African Union.
English